Cyberlink Bd & 3d Advisor Windows 10

CyberLink BD & 3D Advisor. CyberLink Birthday Jolly is a template set for CyberLink PowerDirector, compatible with PowerDirector 11, 10 and 9 editions. CyberLink Birthday. Set for CyberLink PowerDirector, compatible. Downloaded for free from the. Windows installation ISO image ready. After checking for the Blu-ray Disc compatibility, click Save Log and then attach the.zip file to the question. (BD part) (BD part) After checking for the Blu-ray 3D compatibility, click Save Log and then. CyberLink has worked closely with Microsoft to ensure that upon the official release of Windows 10, all CyberLink’s key software is compatible with the new operating system. Click below to check if your existing CyberLink.

4K UHD-BD can't be played : SGX Error with i8100 (Kaby Lake) & Windows 10
Reply to this topic
ChristianGNewbie Private MessageJoined: Mar 28, 2018 08:25Messages: 5Offline
Solved byMar 28, 2018 13:04 Good evening,
I have set up my new HTPC with the goal of playing UHD-BD on my 4k TV. After hours of analysis and experiment, I must say that my project with PowerDVD 17 UHD-BD failed to play. The support, unfortunately, does not answer yet.
Software:

  • PowerDVD 17 Ultra

  • Windows 10 64 Bit Prof. with Kodi

  • SGX installed

  • Intel Management installed

  • Newest graphics driver for the HD 630

  • DVB Viewer Server


Hardware:

  • Intel i3 8100 (8. generation)

  • Gigabyte Z370N with SGX enabled in the Bios, 512 MB located Ram

  • 128 GB Samsung SSD + 6 TB WD RED

  • 8 GB DDR 4 RAM

  • Digitial Devices 4x Sat Receiver

  • Pioneer bdr-211ubk


(In my eyes the most expensive UHD-BD Player that doesn't work. The hardware and software is the from Cyberlink recommend hardware for UHD-BD.)
In the windows device manager I can see the SGX enabled and also the Intel tool says it is active.
I tried to

  1. activate and deactivate the SGX setting in the bios, no affect

  2. I installed the IME (Intel Management Engine) frim the Gigabyte page

  3. I updated the graphics driver

  4. I changed the graphics RAM settings in the Bios

  5. I installed the PowerDVD 14 which is bundled with the BD-Drive

  6. I checkt the SGX service in the windows/settings and it is running

  7. I connected the HDMI port directly to the TV (before there was my Onky 646 in between)

  8. I disabled the lan and connected the HTPC to a separate WIFI over my smartphone

  9. I disabled the windows firewall

  10. I reinstalled PowerDVD 17 Ultra


-> Result: I still get the same error message. Error code 21204 and E8814001
I have no idea to get the 4k movie running and I spent hours to search and try what I can. I assume that the problem is in the PowerDVD Software
Does anybody have an idea what I can do? Or is UHD-BD only a marketing gag and is running only in a laboratory environment?
Please help , Thanks!!!
Christian
Filename
Description
Filesize
Downloaded:
49 time(s)

This message was edited 3 times. Last update was at Mar 29. 2018 04:37

Reply
ChristianGNewbie Private MessageJoined: Mar 28, 2018 08:25Messages: 5Offline
Mar 28, 2018 16:55 Has anybody an idea which Intel Managment Engine I should install to remove the error that this isn't installed? I took now different Version from intel, ASUS, Gigabyte but the message stays. At the moment I have the original version from gigabyte https://www.gigabyte.com/de/Motherboard/Z370N-WIFI-rev-10#support-dl Intel Management Engine Interface [11.7.0.1054] 2017.11.30

This message was edited 1 time. Last update was at Mar 29. 2018 04:35

Reply
CyberLink-ModeratorSenior MemberPrivate MessageJoined: Feb 27, 2018 01:01Messages: 236Offline
Mar 28, 2018 20:40
Hello,
Can you please reply with your support ticket number right away so we can pass it on and investigate?
Cheers
PowerDVD Moderator
Reply
ChristianGNewbie Private MessageJoined: Mar 28, 2018 08:25Messages: 5Offline
Mar 29, 2018 02:23 My support ticket number is CS001873213. Advisor
I receive the error code 21204 and E8814001. With E8814001 with Google I find nothing at the moment, what does this error mean?

Cyberlink Bd And 3d Advisor


Best regards
Christian

This message was edited 1 time. Last update was at Mar 29. 2018 04:33

Reply
QC2.0ContributorPrivate MessageJoined: Apr 27, 2016 04:02Messages: 485Offline
Mar 29, 2018 05:53
QuoteMy support ticket number is CS001873213.
I receive the error code 21204 and E8814001. With E8814001 with Google I find nothing at the moment, what does this error mean?
Best regards
Christian

Did you try BIOS update from Gigabyte?
I found there is a new version BIOS F3 that released on 3/8 at Gigabyte page.

Cyberlink Update For Windows 10

It also improves the graphics compatibility. Reply
ChristianGNewbie Private MessageJoined: Mar 28, 2018 08:25Messages: 5Offline
Mar 29, 2018 05:56Quote
QuoteMy support ticket number is CS001873213.
I receive the error code 21204 and E8814001. With E8814001 with Google I find nothing at the moment, what does this error mean?
Best regards
Christian

Did you try BIOS update from Gigabyte?
I found there is a new version BIOS F3 that released on 3/8 at Gigabyte page.
It also improves the graphics compatibility.
Hi, yes I tried the F2 and F3. No difference. Reply
ghostariesNewbie Private MessageJoined: Mar 31, 2018 05:03Messages: 2Offline
Mar 31, 2018 05:09
I have the same issue about that. Can anyone help how to solve it? Thank you~~
Reply
nilsmanNewbie Private MessageLocation: EuropeJoined: Jun 28, 2014 16:46Messages: 8Offline
Apr 03, 2018 11:45 Same problem here also.
I have spent quite a few hours trying to get this to work (have UHD blu ray working fine on a older Z170 AsRock board so I know how it's done).
I suspect it is related to the Gigabyte BIOS and Intel ME. Have tried all 3 BIOS versions available in combination with both Win 10 1703 and 1709. Have also tried endless combination of Intel ME, Intel SGX and Intel Graphics drivers. Nothing works and always the same error as posted above.
The only thing I might add is that HDCP 2.2 seems to be working with some combinations of all this but not all (I test this using Netflix 4K as that requires HDCP 2.2 and Advanced Protected Audio/Video). I have noted that Cyberlink UltraHD blu ray advisor is not reliable when it comes to HDCP 2.2/APAV. Sometimes it says HDCP 2.2 and/or APAV or 'NO' but I still get Netflix 4K to work. Other times it is right.
Have logged a support case with Gigabyte so we will see what they say... Cyberlink Bd & 3d Advisor Windows 10
PS. Do you guys have these Errors in the Windows Event Viewer?
AESMService: Platform Services error
and
AESMService: Platform Services initialization failed due to Long Term Pairing failure

This message was edited 1 time. Last update was at Apr 03. 2018 11:48

Reply
QC2.0ContributorPrivate MessageJoined: Apr 27, 2016 04:02Messages: 485Offline
Apr 04, 2018 05:38 ASRock is fine on my end, too.
So, both of you got the same error on Gigabyte platforms?
Any motherboard model info can be shared with us here?
ghostaries?

This message was edited 1 time. Last update was at Apr 04. 2018 05:40

Reply
ChristianGNewbie Private MessageJoined: Mar 28, 2018 08:25Messages: 5Offline
Apr 04, 2018 05:38
QuoteASRock is fine on my end, too.
So, both of you got the same error on Gigabyte platforms?
Any motherboard model info can be shared with us here?

As in my initial post, the Gigabyte Z370N Reply
nilsmanNewbie Private MessageLocation: EuropeJoined: Jun 28, 2014 16:46Messages: 8Offline
Apr 04, 2018 11:52
Yes, same - Gigabyte Z370N WIFI (rev. 1.0)

Cyberlink Bd Solution

Reply
nilsmanNewbie Private MessageLocation: EuropeJoined: Jun 28, 2014 16:46Messages: 8Offline
Apr 07, 2018 13:35
I've got UHD blu ray working an Gigabyte Z370N now. But it was not easy...
A couple of things that I can suggest for those of you that do not get it working:
* I'm using F2 BIOS.
* Make sure you use Secure Boot + UEFI. I found this to be a bit tricky/unclear in the Z370N BIOS but it is doable. Also set the internal graphics memory as per cyberlink recommendation (I think it's 128 MB).
* I could not get it to work if I installed Windows 10 1703 and then upgraded to 1709 through Windows Update. In the end I had to create a new install USB with the latest Win 10 1709. This is probably because Windows Update 'upgrades' SGX to the very latest version when upgrading Windows. And that version can then not be downgraded. But if you install 1709 directly and SGX separately it seems to not upgrade SGX from Windows Update.
After the fresh install of Windows 10 1709 I installed the following:
* Intel INF installation 10.1.1.45: http://download.gigabyte.eu/FileList/Driver/mb_driver_chipset_intel_rs3.zip
* Critical ME firmware + software update: http://download.gigabyte.us/FileList/Utility/mb_utility_intel-me-critical-fw_B17.1218.1.zip
* Intel VGA Driver 23.20.16.4849: http://download.gigabyte.eu/FileList/Driver/mb_driver_vga_intel_64_rs3.zip
Then set SGX in BIOS to 'Enabled' in BIOS and installed:
* Intel® Software Guard Extensions Platform 1.9.100.41172: http://download.gigabyte.eu/FileList/Utility/mb_utility_sgx_1.9.100.41172.zip
* PowerDVD version 14 (or 17)
Intel ME and SGX are still not working at this stage (even though they should) and you get the error above in PowerDVD. I had to also install this as a final step:
* Intel INF installation 10.1.17541.8066: http://download.gigabyte.eu/FileList/Driver/mb_driver_chipset_intel_10.1.17541.8066.zip
And then Intel ME and SGX starts working and I could play UHD blu ray.
I'm not sure if these exact steps and drivers are necessary to get it working. But one thing is sure. You cannot install any combination of windows 10 version, drivers and BIOS version and get it to work. It might be a different combination of drivers (and install order) if you are using F1 or F3 BIOS or Windows 10 1703. Big thanks to MelonGx at bluray.com forum who shared the drivers he had working on his Z370N. That helped me narrow down a working combination on a new install.
I might do a fresh install in a few weeks to find out excatly what the problems are. If I find out more I'll post it here.
Reply
ghostariesNewbie Private MessageJoined: Mar 31, 2018 05:03Messages: 2Offline
Apr 09, 2018 06:13
QuoteASRock is fine on my end, too.
So, both of you got the same error on Gigabyte platforms?
Any motherboard model info can be shared with us here?
ghostaries?

I use the ASUS Z170 Premium..But the same..Orz.. Reply
Duggyhow656Newbie Private MessageJoined: Mar 18, 2017 03:51Messages: 31Offline
Aug 11, 2018 19:26 Hi, if anyone knows what drivers, ME, Bios works on the asrock Fatal1ty z220 gaming itx/ac board let me know. I have SGX and HDCP 2.2 not available on advisor. Would like to watch a 4K Blu-ray again. I updated things and it messed it up. Thanks a lot for any help.

This message was edited 1 time. Last update was at Aug 11. 2018 19:28

Reply
Duggyhow656Newbie Private MessageJoined: Mar 18, 2017 03:51Messages: 31Offline
Aug 25, 2018 11:54
Hey all, I was able to fix my issues. I ended up downgrading to an earlier BIOS but the trick was resetting the CMOS instead of just doing default settings. I was told by Asrock that a resetting of CMOS wasn’t required but it did the trick. I didn’t know of anything else that helped. Just install whatever drivers they send you and Reset CMOS afterwards. Hope this helps.
Reply
Duggyhow656Newbie Private MessageJoined: Mar 18, 2017 03:51Messages: 31Offline
May 08, 2020 14:57
Hey all, the problem really lies in installing new video drivers for me. I had to reinstall the vga driver on the asrock site for the Z270 to work and I left the ME files the same. you also need to do the HDMI update also (1.66). Hope this helps.
ReplyReply to this topic